Nat Bind - THOMSON 516 Reference Manual

nat bind

Create a new helper/port binding.
SYNTAX:
nat bind application = <string>
port = <{<supported TCP/UDP port name> | <number>}>
[port_end = <{<supported TCP/UDP port name> | <number>}>]
where:
application The name of a NAT/PAT application helper. The name must be spelled exactly as
listed in the application list.
Tip Use the command :nat applist to obtain the list of applications.
port The TCP/UDP port this application handler should work on.
Select one of the supported TCP/UDP port names (see
Names" on page
port_end The TCP/UDP end port of the range of ports this application handler should work
on.
Select one of the supported TCP/UDP port names (see
Names" on page
EXAMPLE:
=>nat bindlist
Application Proto DefaultPort
SIP udp 5060
...
FTP tcp 21
IRC tcp 6667
RAUDIO(PNA) tcp 7070
=>nat bind application=RAUDIO(PNA) port=7071
=>nat bindlist
Application Proto DefaultPort
SIP udp 5060
...
FTP tcp 21
IRC tcp 6667
RAUDIO(PNA) tcp 7070
RAUDIO(PNA) tcp 7071
=>
RELATED COMMANDS:
nat bindlist
nat unbind
E-DOC-CTC-20040907-0010 v1.0
375) or, alternatively, specify the port number.
375) or, alternatively, specify the port number.
List current NAT/PAT helper/port bindings.
Delete an existing helper/port binding.
" Supported TCP/UDP Port
" Supported TCP/UDP Port
NAT Commands
REQUIRED
REQUIRED
OPTIONAL
249