Dhcp Relay Ifconfig - THOMSON 516 Reference Manual

DHCP Commands

dhcp relay ifconfig

Configure a relay interface.
SYNTAX:
dhcp relay ifconfig
where:
intf The name of the relay interface to be configured.
relay Sets the relay status.
maxhops A number between 0 and 16.
Represents the maximum number of hops allowed in the DHCP packet.
The default is 4.
remoteid Sets the remote id as specified in RFC3046.
trusted Drop/Forward DHCP request packet when the DHCP Relay Agent Option is enabled
(with the command :dhcp relay config agentinfo=on) and the giaddr field is 0
(RFC3046).
EXAMPLE:
=>dhcp relay ifconfig
intf = pppoa_pppoa
[relay] = off
[maxhops] = 4
[remoteid] =
[trusted] = no
=>
94
intf = <string>
[relay = <{off | on}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{no | yes}>]
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0