Cip Ifadd - THOMSON 516 Reference Manual

cip ifadd

Create a Classical IP oA interface at the local side of the Logical IP Subnet (LIS).
SYNTAX:
cip ifadd addr = <ip-address>
[netmask = <ip-mask (dotted or cidr)>]
[uniaddr = <portspec:address[.selector]>]
where:
addr The Classical IP oA interface's local IP address in the LIS.
netmask The LIS's subnetmask.
uniaddr The UNI-address/port specification for incoming connections, e.g. 'A0:*.03': ADSL
port, any address, selector 3.
Note
This parameter is only applicable in an Switched Virtual Channel (SVC)
environment.
In most cases, the Classical IP oA LIS is built in a Permanent Virtual
Channel (PVC) environment.
EXAMPLE:
=>cip iflist
cip1 addr = 172.16.0.5
UNI address = A0:*.04
inarp_reqs_in
inarp_reqs_out =
=>cip ifadd addr=172.16.1.1 netmask=255.255.255.0
=>cip iflist
cip1 addr = 172.16.0.5
UNI address = A0:*.04
inarp_reqs_in
inarp_reqs_out =
cip0 addr = 172.16.1.1
UNI address = A0:*.03
inarp_reqs_in
inarp_reqs_out =
=>
RELATED COMMANDS:
cip ifdelete
cip iflist
E-DOC-CTC-20040907-0010 v1.0
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
mask = 255.255.255.0
= 0 inarp_repl_in
0 inarp_repl_out =
Delete a Classical IP oA interface at the local side of the LIS.
Show current Classical IP oA configuration.
= 0 inarp_inv_in =
0 inarp_inv_out =
= 0 inarp_inv_in =
0 inarp_inv_out =
= 0 inarp_inv_in =
0 inarp_inv_out =
CIP Commands
REQUIRED
OPTIONAL
OPTIONAL
0
0
0
0
0
0
61