Switch Commands
Introduction
This chapter describes the commands of the switch command group.
These commands are only applicable for the SpeedTouch
Contents
This chapter covers the following commands:
switch group flush
Set all ports to the default settings.
switch group list
List all configured groups.
switch group move
Move a specified port to a specified group.
switch mirror capture
Define the specified port to be the Mirror Capture Port.
switch mirror egress
Enable or disable the specified port to be the Mirror Egress Port.
switch mirror ingress
Enable or disable the specified port to be the Mirror Ingress Port.
E-DOC-CTC-20040907-0010 v1.0
TM
546.
Switch Commands
338
339
340
341
342
343
337