Nat Unbind - THOMSON 516 Reference Manual

nat unbind

Delete an existing helper/port binding.
SYNTAX:
nat unbind application = <string>
port = <{<supported TCP/UDP port name> | <number>}>
[port_end = <{<supported TCP/UDP port name> | <number>}>]
where:
application The name of a NAT/PAT application helper.
The name must be spelled exactly as listed in the application list.
Tip Use the command :nat applist to list the names of the NAT/PAT
application helpers.
port The TCP/UDP port this application handler is working on.
Select one of the supported TCP/UDP port names (dee
Names" on page
port_end The TCP/UDP end port of the range of ports this application handler should work
on.
Select one of the supported TCP/UDP port names (See
Names" on page
EXAMPLE:
=>nat bindlist
Application Proto Port
ESP esp 1
...
RAUDIO(PNA) tcp 7070
RAUDIO(PNA) tcp 7072-7075
RTSP tcp 554
SIP udp 5060
=>nat unbind application=RAUDIO(PNA) port=7072 port_end=7075
=>nat bindlist
Application Proto Port
ESP esp 1
...
RAUDIO(PNA) tcp 7070
RTSP tcp 554
SIP udp 5060
=>
RELATED COMMANDS:
nat bind
nat bindlist
E-DOC-CTC-20040907-0010 v1.0
375) or, alternatively, specify the port number.
375) or, alternatively, specify the port number.
Create a new helper/port binding.
List current NAT/PAT helper/port bindings.
" Supported TCP/UDP Port
" Supported TCP/UDP Port
NAT Commands
REQUIRED
REQUIRED
OPTIONAL
263