Adsl Config - THOMSON 516 Reference Manual

ADSL Commands

adsl config

Show/set the Asymmetric Digital Subscriber Line (ADSL) configuration.
Although the command is the same for both SpeedTouch
TM
SpeedTouch ADSL/Integrated Services Digital Network (ISDN) variants, the command features specific
parameter values per variant:
SYNTAX for ADSL/POTS variants:
adsl config
where:
opermode The operational mode of the SpeedTouch
Choose between:
The default is multi_adsl2plus.
trace Enable (on) / disable (off) ADSL tracing.
The default is on.
SYNTAX for ADSL/ISDN variants:
adsl config
where:
opermode The operational mode of the SpeedTouch
Choose between:
The default is multi_adsl2plus.
trace Enable (on) / disable (off) ADSL tracing.
The default is on.
EXAMPLE (for a SpeedTouch
=>adsl config
ADSL configuration:
opermode = multi_adsl2plus
trace = on
modemoption = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
=>
30
[opermode = <{multimode | multi_adsl2 | multi_readsl2
| multi_adsl2plus}>]
[trace = <{off | on}>]
multimode
multi_adsl2
multi_readsl2
multi_adsl2plus.
[opermode = <{multimode | multi_adsl2 | multi_readsl2
| multi_adsl2plus}>]
[trace = <{off | on}>]
multimode
multi_adsl2
multi_readsl2
multi_adsl2plus.
TM
ADSL/POTS variant):
TM
ADSL/Plain Old Telephone System (POTS) and
TM
modem.
TM
modem.
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0