THOMSON 516 Reference Manual page 105

DESCRIPTION:
The stat ...
DHCP server state
Corrupted packet recv
DISCOVER
REQUEST
DECLINE
RELEASE
INFORM
Pure BOOTP requests
Other message types
OFFERs sent
ACKs sent
NAKs sent
Relay agent options dropped
Lease table got full
Ping table got full
Second DHCP server seen
RELATED COMMANDS:
dhcp server clear
E-DOC-CTC-20040907-0010 v1.0
indicates ...
the state of the SpeedTouch
the number of corrupted packets (not complaint to RFC2131) received from the
LAN.
the number of DHCP server discovery packets received from the LAN. These
broadcasts are sent by potential DHCP clients to locate available DHCP servers.
the number of DHCP address lease requests received from the LAN.
the number of DHCP address lease requests declined.
the number of DHCP address release requests received from DHCP clients.
the number of information requests received from DHCP clients.
the number of BOOTP requests received from the LAN.
the number of other messages received from the LAN.
the number of IP address offers sent in reply to DHCP requests.
the number of ACKnowledgement replies sent to successfully configured DHCP
clients.
the number of Not-AcKnowledgement replies sent to wrongly configured DHCP
clients.
whether the maximum number of DHCP leases is reached or not.
whether the history list of IP address pings got full or not. These pings are sent
TM
by the SpeedTouch DHCP server to verify whether the IP address is already in
use on the LAN or not (
whether a concurrent DHCP server was found on the LAN or not.
Clear the DHCP server statistics.
TM
DHCP server.
dhcp server policy verifyfirst=yes
DHCP Commands
).
103