Atm Oam Mode - THOMSON 516 Reference Manual

ATM Commands

atm oam mode

Configure the OAM data blocking mode.
SYNTAX:
atm oam mode
where:
port The port for which OAM blocking is configured.
Choose between:
Or specify a port number (dsl0 has port number 0, ..., atm5 has port number 5).
blocking Enable or disable the OAM data blocking mode on this port.
The default is enabled.
38
port = <{dsl0 | dsl1 | atm2 | atm3 | aal5 | atm5} or number>
blocking = <{disabled | enabled}>
DSL0
DSL1
ATM2
ATM3
AAL5
ATM5
REQUIRED
REQUIRED
E-DOC-CTC-20040907-0010 v1.0