Nat Multinatadd - THOMSON 516 Reference Manual

Multi-user adsl gateways
Hide thumbs Also See for 516:
Table of Contents

Advertisement

NAT Commands

nat multinatadd

Add a MultiNAT configuration.
SYNTAX:
nat multinatadd
where:
intf
inside_addr
outside_addr
addroute
EXAMPLE:
=>ip rtlist
Destination Label
169.254.141.11/32
255.255.255.255/32
10.0.0.138/32
127.0.0.1/32
10.0.0.0/24
169.254.0.0/16
224.0.0.0/4
=>nat multinatadd intf=PPPoE_1 inside_addr=10.0.0.1 outside_addr=10.10.0.138
=>nat multinatlist
Indx
Intf
64
PPPoE_1
=>ip rtlist
Destination Label
0.0.0.0/0
169.254.141.11/32
255.255.255.255/32
10.0.0.138/32
127.0.0.1/32
10.0.0.0/24
169.254.0.0/16
224.0.0.0/4
=>
RELATED COMMANDS:
nat multinatdelete
nat multinatlist
260
intf = <string>
inside_addr = <ip-range>
outside_addr = <ip-range>
[addroute = <{no | yes}>]
The IP interface name where MultiNAT has to be applied.
The IP address of the host behind the address translation device that will receive
the incoming traffic. Typically, a private IP address.
The apparent host IP address this application will running on.
0
Use
to create a template.
Add multinat label routes automatically or not.
The default is yes.
169.254.141.11
169.254.141.11
Inside-address
10.0.0.1
_from_10.0.0.1/32
Delete a MultiNAT configuration.
List MultiNAT configurations.
Gateway
Intf Mtrc Status
eth0
10.0.0.138
eth0
10.0.0.138
eth0
127.0.0.1
loop
10.0.0.138
eth0
eth0
10.0.0.138*
eth0
Outside-address
10.10.0.138
Gateway
Intf Mtrc Status
10.10.0.138
PPPoE_1
169.254.141.11
eth0
10.0.0.138
eth0
10.0.0.138
eth0
127.0.0.1
loop
10.0.0.138
eth0
169.254.141.11
eth0
10.0.0.138*
eth0
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
Static MultiNAT
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
0
[UP]
E-DOC-CTC-20040907-0010 v1.0
REQUIRED
REQUIRED
REQUIRED
OPTIONAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speedtouch 530v5Speedtouch 510v5536546Speedtouch 516Speedtouch 536 ... Show all

Table of Contents