ATM Commands
atm oam ccsend
Send CC activate/deactivate to the connection.
SYNTAX:
atm oam ccsend
where:
port
The ATM port number.
Choose between:
Or specify a port number (dsl0 has port number 0, ..., atm5 has port number 5).
vpi
A number between 0 and 15.
Represents the VPI.
vci
A number between 0 and 511.
Represents the VCI.
For a VP cross-connection, use
span
Send CC action.
Choose between:
action
Enable or disable CC.
The default is disabled.
direction
Indicates the direction of CC activity.
Select either:
Note
RELATED COMMANDS:
atm oam ccconfig
atm oam cclist
36
port = <{dsl0 | dsl1 | atm2 | atm3 | aal5 | atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[span = <{segment | end2end}>]
[action = <{activate | deactivate}>]
[direction = <{source | sink | both}>]
DSL0
DSL1
ATM2
ATM3
AAL5
ATM5.
VCI=0
end2end
segment.
source
sink
both.
If not specified, CC is activated/deactivated for both directions.
Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
Show the current OAM CC configuration.
or do not specify.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0