Bridge Ifadd - THOMSON 516 Reference Manual

Bridge Commands

bridge ifadd

Create a bridged Ethernet interface.
SYNTAX:
bridge ifadd
where:
intf The bridged Ethernet interface name.
Note
dest The destination address for the new interface.
Typically a phonebook entry.
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 73592
TX bytes: 69549
...
ethport5 : Internal
Connection State: connected
Port: ethport5
RX bytes: 2150291312 frames: 2150259736
TX bytes: 2150201352 frames: 2147888072
=>bridge ifadd intf=myBridgeIntf
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 73592
TX bytes: 69549
...
myBridgeIntf: dest : (none)
Retry : 10
Connection State: not-connected
Port: (Unassigned)
=>
RELATED COMMANDS:
bridge ifdelete
bridge iflist
48
[intf = <intfname>]
[dest = <string>]
If not specified, the destination name will double as interface name.
PortNr: 0 PortState: forwarding
frames: 702
frames: 1050
PortNr: 5
PortNr: 0 PortState: forwarding
frames: 702
frames: 1050
QoS : default Encaps : llc/snap
PortNr: (Unknown)
Delete a bridge interface.
Show the current state of all or the selected bridge interfaces.
dropframes: 0
PortState: forwarding
dropframes: 3
dropframes: 0
Fcs : off
PortState: forwarding
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0