Atm Oam Ccconfig - THOMSON 516 Reference Manual

ATM Commands

atm oam ccconfig

Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
SYNTAX:
atm oam ccconfig
where:
port The Asynchronous Transfer Mode (ATM) port number.
Choose between:
Or specify a port number (dsl0 has port number 0, ..., atm5 has port number 5).
vpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI)
vci A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
For a VP cross-connection, use
transmit Enable or disable transmission of CC cells.
The default is disabled.
receive Enable or disable loss of continuity.
The default is disabled.
auto Enable or disable remote CC activation and deactivation.
The default is disabled.
span Select either:
RELATED COMMANDS:
atm oam cclist
atm oam ccsend
34
port = <{dsl0 | dsl1 | atm2 | atm3 | aal5 | atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled | enabled}>]
[receive = <{disabled | enabled}>]
[auto = <{disabled | enabled}>]
[span = <{segment | end2end}>]
DSL0
DSL1
ATM2
ATM3
AAL5
ATM5.
VCI=0
end2end:monitoring occurs on the entire VC between two ATM end stations.
segment:monitoring occurs on a VC segment between the SpeedTouch
first-hop ATM switch.
Show the current OAM CC configuration.
Send CC activate/deactivate to the connection.
or do not specify.
REQUIRED
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
TM
and a
E-DOC-CTC-20040907-0010 v1.0