Pppoe Iflist - THOMSON 516 Reference Manual

pppoe iflist

Show current configuration of all or a specified PPPoE interface(s).
SYNTAX:
pppoe iflist [intf = <intfname>]
where:
intf The name of the PPPoE interface.
Note
If not specified, all PPPoE interfaces are shown.
EXAMPLE :
=>pppoe iflist
myPPPoE: dest : myETHoA
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe
admin state = up
LCP : state = reqsent
IPCP: state = initial
acname : --- service : ---
yourPPPoE: dest : RELAY
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = janedoe
admin state = up
LCP : state = reqsent
IPCP: state = initial
acname : --- service : ---
=>
RELATED COMMANDS:
pppoe ifadd
pppoe ifdelete
E-DOC-CTC-20040907-0010 v1.0
[00:00:00]
password = ********
oper state = down link state = connected
retransm = 6 term. reason =
retransm = 0 term. reason =
[00:00:00]
password = ********
oper state = down link state = connected
retransm = 1 term. reason =
retransm = 0 term. reason =
Create a new PPPoE interface.
Delete a PPPoE interface.
PPPoE Commands
OPTIONAL
295