Bridge Ifdelete - THOMSON 516 Reference Manual

Bridge Commands

bridge ifdelete

Delete a bridge interface.
SYNTAX:
bridge ifdelete
where:
intf The name of the interface name to be deleted.
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 99930
TX bytes: 93572
...
ethport5 : Internal
Connection State: connected
Port: ethport5
RX bytes: 2150291312 frames: 2150259736
TX bytes: 2150201352 frames: 2147888072
myBridgeIntf: dest : ATM1
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 0
TX bytes: 0
=>bridge ifdelete intf=myBridgeIntf
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 99930
TX bytes: 93572
...
ethport5 : Internal
Connection State: connected
Port: ethport5
RX bytes: 2150291312 frames: 2150259736
TX bytes: 2150201352 frames: 2147888072
=>
RELATED COMMANDS:
bridge ifadd
bridge iflist
52
intf = <intfname>
PortNr: 0 PortState: forwarding
frames: 969
frames: 1443
PortNr: 5 PortState: forwarding
QoS : default Encaps : llc/snap
PortNr: 6 PortState: forwarding
frames: 0
frames: 0
PortNr: 0 PortState: forwarding
frames: 969
frames: 1443
PortNr: 5 PortState: forwarding
Create a bridged Ethernet interface.
Show the current state of all or the selected bridge interfaces.
dropframes: 0
dropframes: 3
Fcs : off
dropframes: 0
dropframes: 0
dropframes: 3
REQUIRED
E-DOC-CTC-20040907-0010 v1.0