Pppoa Ifconfig - THOMSON 516 Reference Manual

pppoa ifconfig

Configure a PPPoA interface.
SYNTAX:
pppoa ifconfig intf = <intfname>
[dest = <phonebook entry>]
[user = <string>]
[password = <password>]
[qos = <{default}>]
[encaps = <{vcmux | llc}>]
[pcomp = <{off | on}>]
[accomp = <{on | off | negotiate}>]
[trace = <{off | on}>]
[auth = <{pap | chap | auto}>]
[restart = <{off | on}>]
[retryinterval = <number{0-65535}>]
[passive = <{off | on}>]
[silent = <{off | on}>]
[echo = <{off | on}>]
[mru = <number{293-8192}>]
[laddr = <ip-address>]
[raddr = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[format = <{cidr | dotted | none}>]
[pool = <{none}>]
[savepwd = <{off | on}>]
[demanddial = <{off | on}>]
[primdns = <ip-address>]
[secdns = <ip-address>]
[dnsmetric = <number{0-100}>]
[idle = <number{0-1000000}>]
[idletrigger = <{RxTx | Rx | Tx}>]
[addrtrans = <{none | pat}>]
[unnumbered = <{off | on}>]
where:
intf The name of the PPPoA interface to be configured.
dest The destination for this PPPoA interface. Typically, a phonebook entry.
user The user name for remote PAP/CHAP authentication.
password The password for remote PAP/CHAP authentication.
qos The name of a qosbook entry defining the QoS parameters for the WAN link.
encaps The WAN protocol encapsulation to be used on this interface.
Choose between:
vcmux
llc.
The default is vcmux.
E-DOC-CTC-20040907-0010 v1.0
PPPoA Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
275