Ethoa Ifadd - THOMSON 516 Reference Manual

ethoa ifadd

Create a new ETHoA interface.
SYNTAX:
ethoa ifadd [intf = <string>]
[dest = <string>]
where:
intf The name for the new Ethernet Over ATM (ETHoA) interface.
Note
If not specified, the destination will double as interface name.
dest The destination for the new ETHoA interface.
This is a phonebook entry.
EXAMPLE:
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
=>phonebook list
Name Type
Br1 bridge
Br2 bridge
CIPPVC3 cip
CIPPVC4 cip
=>ethoa ifadd intf=Moreethoa dest=Br4
=>ethoa iflist
Newethoa : dest : Br3
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
Moreethoa : dest : Br4
Retry : 10
Connection State : not-connected
=>
RELATED COMMANDS:
ethoa ifdelete
ethoa iflist
E-DOC-CTC-20040907-0010 v1.0
QoS : default Encaps : llc/snap
frames: 0
frames: 0 dropframes: 0
Use Address
1 8.35
1 8.36
1 8.82
1 8.83
QoS : default Encaps : llc/snap
frames: 0
frames: 0 dropframes: 0
QoS : default Encaps : llc/snap
Delete an ETHoA interface.
Show all or a specified ETHoA interface(s).
ETHoA Commands
OPTIONAL
OPTIONAL
Fcs : off
Fcs : off
Fcs : off
147