Transmission Installation - Suzuki RM-Z250 Owner's Service Manual

10-14 TRANSMISSION AND CRANKSHAFT

TRANSMISSION INSTALLATION

The removed snap ring should be replaced with a new
one.
Install the snap ring in the groove and locate its end
as shown in the illustration.
• Apply engine oil to the following parts:
driveshaft, countershaft, transmission gears, bearings.
• Install the driveshaft 1 and countershaft 2 with gears
installed.
NOTE:
Install the washers A, B located in both ends of the driveshaft
positively.
CAUTION
Thrust
Sharp edge