Table of Contents
Advertisement
c)
From Main menu->Setting->Event->Alarm, you can go to Figure 4-55 to set alarm
parameter and enable snapshot function.
d)
Click Save button to save alarm snapshot setup.
4.7.5 Manual Record/Snapshot
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
Manual Record
4.7.5.1
a)
Right click mouse and select manual record or in the main menu, from
Setting->Storage->Manual Record. Manual record menu is shown in Figure 4-57.
Tip: You can click Rec button on the front panel (if possible) to go to the Manual Record interface.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-56
61
Advertisement
Table of Contents
