Advanced - Qvis IZEUS 7000 NVR RANGE User Manual

Parameter Function

SATA


SN You can view the HDD amount the device connected to;
﹡ means the second HDD is current working HDD.
Type The corresponding HDD property.
Total space The HDD total capacity.
Free space The HDD free capacity.
Status HDD can work properly or not.
Bad track Display there is bad track or not.
Page up Click it to view previous page.
Page down Click it to view the next page.
View Click it to view HDD record information (file start time and end time).
recording time
View HDD Click it to view HDD property, status , etc.,
type and
capability

4.12.3 Advanced

This is to set HDD group, and HDD group setup for main stream, sub stream and snapshot
operation.
IMPORTANT
HDD group and quota mode cannot be valid at the same time. System needs to restart once
you change the mode here.
The HDD group mode is shown in Figure 4-114.

HDD: Here you can view the HDD amount the device can support.

Group: It lists the HDD Group number of current hard disk.
© Copyright Qvis ®. All documentation rights reserved.
1 here means there is 1 HDD.
For different series product, the max HDD amount may vary,
When HDD is working properly, system is shown O. . "_" means
there is no HDD.
115