Figure 5-81
5.7.3 Alarm Output
This menu section is for you to set the proper alarm output.
Please highlight the
icon to select the corresponding alarm output.
After all the setups are complete please click OK button, system goes back to the previous menu
(see Figure 5-82).
Figure 5-82
5.7.4
Manual Record
Note: You need to have proper rights to implement the following operations. Please make
sure the HDD has been properly installed.
5.7.4.1
Manual record menu
Right click mouse or in the main menu, Advanced->Manual Record.
Manual record menu is shown as in Figure 5-83.
© Copyright Qvis ®. All documentation rights reserved.
81