Alarm Output; Manual Record - Qvis Iapollo SMART NVR User Manual

4.7.3 Alarm Output

This menu section is for you to set the proper alarm output.
Please highlight the
After all the setups are complete please click OK button, system goes back to the previous menu
(see Figure 4-82).
4.7.4

Manual Record

Note: You need to have proper rights to implement the following operations. Please make
sure the HDD has been properly installed.
4.7.4.1 Manual record menu
Right click mouse or in the main menu, Advanced->Manual Record.
Manual record menu is shown as in Figure 4-83.
4.7.4.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight the"○"icon to select the
corresponding channel.

Manual: The highest priority. After completed manual setup, all the selected channels will
begin ordinary recording.

Schedule: Channel records as you have adjusted the settings in recording setup (Main
Menu->Setting->Schedule)

Stop: All channels stop recording.
© Copyright Qvis ®. All documentation rights reserved.
icon to select the corresponding alarm output.
Figure 4-82
70