Qvis IZEUS 7000 NVR RANGE User Manual page 78

11 Backup
12 Clip
Please note:


Record
In any play mode, the time bar will change once you modify the search type.
13
type
Smart
14
search
Other
channel
When playing the file, click the number button, the system can switch to the same
15 sync
period of the corresponding channel to play.
switch for
playback
© Copyright Qvis ®. All documentation rights reserved.

Select the file(s) you want to backup from the file list. You can check from
the list. Then click the backup button, now you can see the backup menu.
System supports a customised path setup. After select or create new folder,
click the Start button to begin the backup operation. The record file(s) will be
saved in the specified folder.

Check the file again you can cancel current selection. System can display a
maximum of 32 files from one channel.

After you clip on record file, click Backup button you can save it.

For one device, if there is a backup in process, you cannot start a new
backup operation.
 This is to edit the file.
 Please play the file you want to edit and then click this button when you
want to edit. You can see the corresponding slide bars in the time bar of
the corresponding channel. You can adjust the slide bar or input the
accurate time to set the file end time.
 After you set, you can click Clip button again to edit the second period.
You can see the slide bar restore its previous position.
 Click Backup button after clip, you can save current contents in a new
file.
 You can clip for one channel or multiple-channel. The multiple-channel
click operation is similar with the one-channel operation.
System max supports 1024 files backup at the same time.
You cannot operate clip operation if there is any file has been checked in
the file list.
Other Functions

When system is playing, you can select a zone in the window to begin
smart search. Click the motion detect button to begin play.

Once the motion detect play has begun, click button again will terminate
current motion detect file play.

There is no motion detect zone by default.

If you select to play other file in the file list, system switches to motion
detect play of other file.

During the motion detect play process, you cannot implement operations
such as change time bar, begin backward playback or frame by frame
playback.

Please refer to chapter 4.8.2.1 Smart Search for detailed operation.
69