Event - Qvis IZEUS 7000 NVR RANGE User Manual

5.8.2.14.4 Login
Open the browser and then input https://xx.xx.xx.xx:port.
xx.xx.xx.xx: is your device IP or domain mane.
Port is your HTTPS port. If you are using default HTTPS value 443, you do not need to add port
information here. You can input https://xx.xx.xx.xx to access.
Now you can see the login interface if your setup is right.
5.8.3

Event

5.8.3.1 Video detect
5.8.3.1.1 Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving signal
reached the sensitivity you set here.
The motion detect interface is shown as in Figure 5-49.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-49
177