Table of Contents
Advertisement
Please make sure system is in one-channel mode.
4.3.6 Search
Click button
, the system goes to the search interface. Please refer to chapter 4.8.2
4.3.7 Alarm Status
Click button
, system goes to alarm status interface. This is to view device status and
channel status. Please refer to chapter 4.14.1.4.
4.3.8 Channel Info
Click button
, the system goes to the channel information setup interface. This is to view
information of the corresponding channel. See Figure 4-9.
4.3.9 Remote Device
Click
, system goes to the remote device interface. Please refer to chapter 4.4
4.3.10 Network
Click
, system goes to the network interface. This is to set network IP address, default
gateway , etc.. Please refer to chapter 4.11.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-9
24
Advertisement
Table of Contents
