Table of Contents
Advertisement
Preset Setup
1. In Figure 4-32, click preset button and use eight direction arrows to adjust camera to the
proper position. The interface is shown in Figure 4-33.
2. Click Set button and then input preset number.
3. Click Set button to save current preset.
Tour Setup
In Figure 4-32, click tour button.
Input tour value and preset number. Click Add preset button to add current preset to the tour. See
Figure 4-34.
Tip:
Repeat the above steps to add more presets to the tour. Click Del preset button to remove it from
the tour. Please note some protocols do not support delete preset function.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-32
Figure 4-33
43
Advertisement
Table of Contents
