Qvis IZEUS 7000 NVR RANGE User Manual page 217

5.8.5.10 PTZ
The PTZ interface is shown as in Figure 5-96 (Local) and Figure 5-97 (Remote).
Before setup, please check the following connections are right:
1. PTZ and decoder connection is right. Decoder address setup is right.
2. Decoder A (B) line connects with NVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control
speed dome.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-96
Figure 5-97
208