Qvis IZEUS 7000 NVR RANGE User Manual page 54

Call PTZ Function
4.6.2.2
Call Preset
In Figure 4-31, input preset value and then click
stop call.
Call Pattern
In Figure 4-31, input pattern value and then click
stop call.
Call Tour
In Figure 4-31, input tour value and then click
call.
Call Scan
In Figure 4-31, input Scan value and then click
call.
Rotate
In Figure 4-31, click
System supports preset, tour, pattern, scan, rotate and light functions.
Notes:

Preset, tour and pattern all need the value to be the control parameters. You can define it as
you require.

You need to refer to your camera user's manual for Aux definition. In some cases, it can be
used for special process.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-36
to enable the camera to rotate.
to call a preset. Click
to call a pattern. Click
to call a tour. Click again
to call a tour. Click again
again to
again to
to stop
to stop
45