b)
Check the box here to select manual record channel(s). You can see the
corresponding indicator light on the front panel is on.
Channel: This is to display the device all channels.
Manual: This has the highest priority. Enable corresponding channel to record no matter what
period applied in the record setup. Now system is record general file.
Auto: System enables auto record function as you set in chapter 4.7.2 schedule interface
(General/Motion detect/Alarm)
Stop: Stop current channel record/Snapshot no matter what period applied in the record
setup.
All: Check the All box to select all channels.
c)
Click OK button to complete manual record setup.
Manual Snapshot
4.7.5.2
Click
button at the preview control bar, you can snapshot 1-5 picture(s). From main
menu->Setting->Camera->Encode->Snapshot, you can set the snapshot times. You can go to
chapter 4.8 to view snapshot picture.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-57
62