Data And Time - Qvis IZEUS 7000 NVR RANGE User Manual


Realtime play: This is to set playback time you can view in the preview interface. The value
ranges from 5 to 60 minutes.

Auto logout: This is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.

Navigation bar: Check the box here, system displays the navigation bar on the interface.

IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.

Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.

Mouse property: You can set the double click speed via dragging the slide bard. You can
Click Default button to restore default setup.

4.13.2 Data and Time

From Main menu->Setting->System->General, you can go to the general interface. See Figure
4-121.

System time: This is for you to set system time

Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.

Date separator: There are three denotations to separate date: dot, beeline and solidus.

DST: Here you can set the DST time and date by week or by date. Please enable DST
function and then select setup mode. Please input start time and end time and click Save
button.

Time format: There are two types: 24-hour mode or 12-hour mode.

NTP: This is to set NTP server, port and interval.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-120
120