Table of Contents
Advertisement
Except the above mentioned addresses of special meaning, you can use other addresses. For
example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After you logged in the Web, the Web can automatically get multiple cast address and add it to the
multiple cast groups. You can enable real-time monitor function to view the view.
Please note multiple cast function applies to special series only.
Alarm Centre
4.11.1.12
This interface is reserved for you to develop. See Figure 4-106.
Auto register
4.11.1.13
This function allows the device to auto register to the proxy you specified. In this way, you can use
the client-end to access the NVR via the proxy. Here the proxy has a switch function. In the
network service, device supports the server address of IPv4 or domain.
Please follow the steps listed below to use this function.
Please set proxy server address, port, and sub-device name at the device-end. Please enable the
auto register function, the device can auto register to the proxy server.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-106
108
Advertisement
Table of Contents
