Qvis IZEUS 7000 NVR RANGE User Manual page 84


Export: Please connect the peripheral device first and then go to the following interface.
Click Export button, you will see there is a corresponding "Config_Time" folder. Double click
the folder, you can view some backup files.

Import: Here you can import the configuration files from the peripheral device to the current
device. You need to select a folder first. You can see a dialogue box asking you to select a
folder if you are selecting a file. System pops up a dialogue box if there is no configuration file
under current folder. After the successful import, the system needs to reboot to activate new
setup.

Format: Click Format button, system pops up a dialogue box for you to confirm current
operation. System begins format process after you click the OK button.
Notes:

System cannot open config backup interface again if there is backup operation in the
process.

System refreshes device when you go to the config backup every time and set current
directory as the root directory of the peripheral device.

If you go to the configuration backup interface first and then insert the peripheral device,
please click Refresh button to see the newly added device.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-68
75