Qvis IZEUS 7000 NVR RANGE User Manual page 20

Port Name
NC5
A
RS-485
communication
B
port
CTRL 12V /
+12V /
Network port
eSATA eSATA port
USB2.0 port
RS-232 RS232
COM.
High
HDMI
Media Interface
VGA video output
VGA
port
PoE
8 PoE ports
PORTS
PoE
16 PoE ports
PORTS
© Copyright Qvis ®. All documentation rights reserved.
NO3～C3, Group 4：port NO4～C4, Group 5:
port NO5, C5, NC5). Output alarm signal to the
alarm device. Please make sure there is power
to the external alarm device.

NO: Normal open alarm output port.

C: Alarm output public end.

NC: Normal close alarm output port.
RS485_A port. This is for cable A. You can connect
to the control devices such as speed dome PTZ.
RS485_B.This is for cable B. You can connect to
the control devices such as speed dome PTZ.
Controller 12V power output. This is to control the
on-off alarm relay output. It can be used to control
the device alarm output. At the same time, it can
also be used as the power input source of some
devices such as the alarm detector.
+12V power output port. It can provide the power to
some peripheral devices such as the camera or the
alarm device. Please note the supplying power
needs to be below 1A.
10M/100M/1000Mbps self-adaptive Ethernet port.
Connect to the network cable.
External SATA port. It can connect to the device of
the SATA port. Please jump the HDD when there is
peripheral connected HDD.
USB2.0 port. Connect to mouse, USB storage
device, USB burner , etc..
debug This is for general COM debug to configure IP
address or transfer transparent COM data.
High definition audio and video signal output port. It
Definition transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the
display device. HDMI version is 1.3
VGA video output port. Output analog video signal.
It can connect to the monitor to view analog video.
Built-in Switch. Support PoE.
The 8 PoE ports series products supports total 48V
120W power. One PoE port supports max 15W.
Built-in Switch. Support PoE. The 16 PoE ports
series products supports total 150W power. One
PoE port supports max 15W.
Function
11