Motion Detect Snapshot
4.7.3.2
a)
From Main menu->Setting->Camera->Encode->Snapshot, you can go to snapshot
interface. See Figure 4-54.
b)
In Figure 4-54, select trigger snapshot from the dropdown list and then set picture size,
quality and snapshot frequency. Click OK button to save current setup.
c)
From Main menu->Setting->Event->Detect, here you can select motion detect type,
motion detect channel and then check the enable box. Please refer to chapter 4.7.3.1.
d)
Click OK button to complete motion detect setup.
4.7.4 Alarm Record/Snapshot
Alarm Record
4.7.4.1
a)
Before you set alarm setup information, please go to chapter Error! Reference source
not found. to connect alarm input and alarm output cable (such as light, siren , etc.).
b)
The record priority is: Alarm>Motion detect>Regular.
In the main menu, from Setting->Event-> Alarm, you can see alarm setup interface. See Figure
4-55.
1. Alarm in: This is for you to select channel number.
2. Event type: There are four types. Local input/network input/IPC external/IPC offline
alarm.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-54
59