Qvis IZEUS 7000 NVR RANGE User Manual page 202

5.8.4.3 Record Control
The interface is shown as in Figure 5-75.
Please refer to the following sheet for detailed information:
Parameter Function
Here you can view channel number.
Channel
The number displayed here is the max channel amount of your
device.
Status There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
Schedule
setup (general, motion detect and alarm).
It has the highest priority.
Manual
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
Stop
record setup.
Check the corresponding All button; you can enable or disable all
Start all/
stop all
channels record.
5.8.4.4 Storage
5.8.4.4.1 Main Stream
The main stream interface is shown as in Figure 5-76. Here you can set corresponding HDD
group to save main stream.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-75
193