4.14.5 Default
You can restore factory default setup to fix some problems when the device is running slowly.
Configuration error occurred.
From Main menu->Setting->System->Default, you can go to the default interface. See Figure
4-137.
Click default icon, system pops up a dialogue box. You can highlight
setup.
All
Camera
Network
Event
Storage
System
Please highlight icon
OK button, system goes back to the previous menu.
WARNING!
AFTER YOU HAVE USED THE DEFAULT FUNCTION, SOME YOUR CUSTOMISED
SETUP MAY BE LOST FOREVER! PLEASE THINK TWICE BEFORE YOU BEGIN THIS
OPERATION!
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-136
to select the corresponding function. After all the setups please click
to restore factory default
133