Qvis IZEUS 7000 NVR RANGE User Manual page 207

5.8.5.2 Account
Notes:

For the character in the following user name or the user group name, system max supports
6-digits. The space in the front or at the end of the string is null. The valid string includes:
character, number, and underline.

The user amount default setup is 64 and the group amount default setup is 20. The factory
default setup includes two levels: user and admin. You can set the corresponding group and
then set the rights for the respective user in the specified groups.

User management adopts group/user modes. The user name and the group name shall be
unique. One user shall be included in only one group.
5.8.5.2.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-82.
Add user: This is to add a name to group and set the user rights. See Figure 5-83.
There are four default users: admin/888888/666666 and hidden user "default". Except user 6666,
other users have administrator right. The user 666666 can only have the monitor rights.
Hidden user "default" is for system interior use only and cannot be deleted. When there is no login
user, hidden user "default" automatically login. You can set some rights such as monitor for this
user so that you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the
admin.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-82
198