Table of Contents
Advertisement
Click the Finish button, the system will then pop up a dialogue box. Click the OK button, the
startup wizard will then be complete. See Figure 4-7.
Figure 4-7
4.3 Navigation Bar
You need to go to the Main menu->Setting->System->General to enable navigation bar
function; otherwise you cannot see the following interface.
The navigation bar is shown below. See Figure 4-8.
Figure 4-8
4.3.1 Main Menu
Click button
to go to the main menu interface.
4.3.2 Output Screen
Select corresponding window-split mode and output channels.
4.3.3 Tour
Click button
to enable tour, the icon becomes
, you can see the tour is in process.
4.3.4 PTZ
Click
, the system goes to the PTZ control interface. Please refer to chapter 4.6.2.
4.3.5 Color
Click button
, the system goes to the color interface. Please refer to chapter 4.5.4.1.
© Copyright Qvis ®. All documentation rights reserved.
23
Advertisement
Table of Contents
