Table of Contents
Advertisement
From main menu->Setting->Camera-Channel name, you can see an interface shown in Figure
4-14.
This is to modify channel name. It supports a maximum of 31-characters.
Please note you can only modify the channel name of the connected network camera.
Figure 4-14
4.4.5 Upgrade
This is to update the network camera.
From main menu->setting->camera->remote, the interface is shown below. See Figure 4-15.
Click Browse button and then select the upgrade file. Then select a channel (or you can select
device type filter to select several devices at the same time.)
Click Begin button to upgrade. You can see the corresponding dialogue once the upgrade is
finish.
© Copyright Qvis ®. All documentation rights reserved.
29
Advertisement
Table of Contents
