Qvis IZEUS 7000 NVR RANGE User Manual page 160

Parameter Function
Delete
Click
channel.
Connection
status
Delete Select a device in the Added device list and then click Delete button,
system can disconnect the device and remove it from the Added
device list.
Click it, the interface is shown as in Figure 5-16. Here you can add
Manual
Add
network camera manually.
You can select a channel from the dropdown list (Here only shows
disconnection channel.)
Notes:



© Copyright Qvis ®. All documentation rights reserved.
, you can delete the remote connection of the corresponding
: Connection succeeded.
: Connection failed.
System supports manufactures such as Panasonic, Sony,
Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif standard
protocol.
If you do not input IP address here. System uses default IP
192.168.0.0 and system does not connect to this IP.
Cannot add two devices at the same time. Click OK button here,
system only connect to the corresponding device of current
channel.
Figure 5-16
151