Table of Contents
Advertisement
Double click an IP address or check one IP address and then click Add button, you can add
current device to the bottom pane of the interface. System supports batch add function.
Click Manual Add button, you can add a device directly. Here you can set the TCP/UPD/auto
connection mode. The default setup is TCP. See Figure 4-11.
IMPORTANT!
Please note the manual add function is for, Panasonic, Sony, Dynacolor, Samsung, AXIS,
Arecont, ONVIF and Custom. When the type is the custom, you can just input URL address,
user name and password connect to the network camera without considering network
camera manufacture. Please contact your network camera manufacturer for the URL
address.
Figure 4-11
4.4.2 Short-Cut Menu
"+"
In the preview interface, for the channel with no IPC connection, you can click the icon
in
the centre of the interface to quickly go to the Remote Device interface. See Figure 4-12.
© Copyright Qvis ®. All documentation rights reserved.
26
Advertisement
Table of Contents
