Qvis IZEUS 7000 NVR RANGE User Manual page 103

Connection
4.11.1.1
The connection setup interface is shown in Figure 4-91.

Max connection: system support maximal 128 users. 0 means there is no connection limit.

TCP port: Default value is 37777.

UDP port: Default value is 37778.

HTTP port: Default value is 80.

HTTPS port: Default value is 443.

RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the above
four ports. Please make sure the port values here do not conflict.
WIFI
4.11.1.2
The WIFI interface is shown below. See Figure 4-92.

Enable: Check the box here to enable WIFI function.

Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.

Disconnect: Here you can click it to turn off the connection.

Connect: Here you can click it to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot if there is connection of you selected one.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-91
94