Record And Snapshot; Encode - Qvis IZEUS 7000 NVR RANGE User Manual

4.7 Record and Snapshot

The record/snapshot priority is: Alarm->Motion detect->Schedule.

4.7.1 Encode

Encode
4.7.1.1
Encode setting is to set IPC encode mode, resolution, bit stream type, etc..
From Main menu->Setting->System->Encode, you can see the following interface. See Figure
4-38.

Channel: Select the channel you want.

Type: Please select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the the various encode parameters for different record types.

Compression: System supports H.264, MPEG4, MJPEG, etc..

Resolution: The mainstream resolution type is IPC's encoding config. Generally there is
D1/720P/1080P.

Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.

Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set the
video quality.

Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.

Video/audio: You can enable or disable the video/audio. Please note, once you enable audio
function for one channel, system may enable audio function of the rest channels by default.

Copy：After you complete the setup, you can click Copy button to copy current setup to other
channel(s). You can see an interface is shown in Figure 4-41. You can see current channel
number is grey. Please check the number to select the channel or you can check the box ALL.
Please click the OK button in Figure 4-41 and Figure 4-39 respectively to complete the setup.
Please note, once you check the 'All' box, you set same encode setup for all channels.
Audio/video enable box overlay button and the copy button is shield.
Please highlight icon
© Copyright Qvis ®. All documentation rights reserved.
to select the corresponding function.
47