Qvis IZEUS 7000 NVR RANGE User Manual page 192

Please refer to the following sheet for detailed information.
Parameter
Enable
Period
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-57
Figure 5-58
Figure 5-59
Function
You need to check the box to enable this function.
Please select a channel from the dropdown list.
This function becomes activated in the specified periods.
There are six periods in one day. Please draw a circle to
enable corresponding period.
Select date. If you do not select, current setup applies to
today only. You can select all week column to apply to the
183