Table of Contents
Advertisement
4.5.1 Preview
If you want to change system date and time, you can refer to general settings (Main
Menu->Setting->System->General). If you want to modify the channel name, please refer to
the display settings (Main Menu->Camera->CAM name).
Please refer to the following sheet for detailed information:
1
Recording status
2
Motion detection
Tips:
Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2, release
mouse you can switch channel 1 and channel 2 positions.
Use mouse middle button to control window split: You can use mouse middle button to
switch window split amount.
4.5.2 Preview control interface
Move you mouse to the top centre of the video of current channel, you can see system pops
up the preview control interface. See Figure 4-19. If your mouse stays in this area for more
than 6 seconds and has no operation, the control bar automatically hides.
1)
Realtime playback
This is to playback the previous 5-60 minutes record of current channel.
Please go to the Main menu->Setting->->System->General to set real-time playback time.
System may pop up a dialogue box if there is no such record in current channel.
2)
Digital zoom
This is to zoom in specified zone of current channel. It supports zoom in function of
multiple-channel.
Click button
, the button is shown
© Copyright Qvis ®. All documentation rights reserved.
3
4
1
2
3
Figure 4-19 Digital Channel
.
Video loss
Camera lock
4
6
7
32
Advertisement
Table of Contents
