2 Front Panel and Rear Panel
2.1 Front Panel: 8 Channel NVR
The front panel is shown in Figure 2-1.
2.2 Front Panel: 16 Channel NVR
The front panel is shown in Figure 2-2.
2.3 Front Panel: Function Explanation
Please refer to the following sheet for front panel button information for both 8 & 16 Channel NVR.
Name
Power button
Shift
Shift
Up
、
Down
© Copyright Qvis ®. All documentation rights reserved.
Figure 2-1
Figure 2-2
Icon
Function
Power button, press this button for three seconds to boot up
or shut down NVR.
In textbox, press this button to switch between numeral,
English(Small/Capitalized),donation, etc..
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
6