Qvis IZEUS 7000 NVR RANGE User Manual page 106

PPPoE
4.11.1.4
PPPoE interface is shown in Figure 4-94.
Input "PPPoE name" and "PPPoE password" you get from your ISP (Internet service provider).
Click save button, you need to restart to activate your configuration.
After rebooting, NVR will connect to internet automatically. The IP in the PPPoE is the NVR
dynamic value. You can access this IP to visit the unit.
DDNS Setup
4.11.1.5
DDNS setup interface is shown in Figure 4-95.
You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In
other words, this PC is a DNS (domain name server).
1. In network DDNS, please select DDNS type and highlight enable item. Then please input
your PPPoE name you get from you IPS and server IP (PC with DDNS). Click save button
and then reboot system.
2. Click save button, system prompts you to reboot to get all setup activated.
3. After rebooting, open Internet Explorer and input as below:
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-94
97