Qvis IZEUS 7000 NVR RANGE User Manual page 213

Please refer to the following sheet for detailed information.
Parameter Function
Check the box here to enable tour function.
Enable tour
This is for you to adjust transparency. The value ranges from 5 to
Interval
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
Split
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
Motion
System supports 1/8-window now.
tour/Alarm
tour
5.8.5.4 Alarm Out
The alarm output interface is shown as below. See Figure 5-90
Here you can set alarm output mode: auto/manual/stop.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-89
204