Qvis IZEUS 7000 NVR RANGE User Manual page 158

Please refer to the following contents for LAN and WAN login difference.
1. In the WAN mode, system opens the main stream of the first channel to monitor by default.
The open/close button on the left pane is null.
2. You can select different channels and different monitor modes at the bottom of the interface.
See Figure 5-14.
IMPORTANT
The window display mode and the channel number are by default. For example, for the
16-channel, the max window split mode is 16.
3. Multiple-channel monitor, system adopts extra stream to monitor by default. Double click one
channel, system switches to single channel and system uses main stream to monitor. You can
view there are two icons at the left top corner of the channel number for you reference. M
stands for main stream. S stands for sub stream (extra stream).
4. If you login via the WAN mode, system does not support alarm activation to open the video
function in the Alarm setup interface.
IMPORTANT

For multiple-channel monitor mode, system adopts extra an stream to monitor by
default. You cannot modify this manually. All channels are trying to synchronise.
Please note the synchronisation effect still depends on your network environment.
© Copyright Qvis ®. All documentation rights reserved.
Figure 5-14
149