Qvis IZEUS 7000 NVR RANGE User Manual page 140

4.14.3.1 Add/Modify Group
Click the add group button, the interface is shown below. See Figure 4-134.
Here you can input group name and then input some memo information if necessary.
There are many different functions on the device that rights can be assigned to groups to allow
them to modify/operate, such as control panel, shut down, real-time monitor, playback, record,
record file backup, PTZ, user account, system information view, alarm input/output setup, system
setup, log view, clear log, upgrade system, control device , etc.
The modify group interface is similar to the Figure 4-134.
4.14.3.2 Add/Modify User
Click add user button, the interface is shown in Figure 4-135.
Please input the user name, password, and select the group it belongs to from the dropdown list.
Then you can check the corresponding rights for current user.
For convenient user management, usually we recommend the general user right is lower than the
admin account.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-134
131