Table of Contents
Advertisement
Please note system cannot use Sniffer over several network adapters at the same time.
After the Sniffer begins, you can exit to implement corresponding network operation such as login
WEB, monitor. Please go back to Sniffer interface to click
stop Sniffer. System can save the
packets to the specified path. The file is named after "Network adapter name+time". You can use
software such as Wireshark to open the packets on the PC for the professional engineer to solve
complicated problems.
Figure 4-109
Network Load
4.11.2.2
From Main menu->Info-Network->Load, network load is shown in Figure 4-110. Here you can
view the follow statistics of the device network adapter.
Here you can view information of all connected network adapters. The connection status is shown
offline if connection is disconnected. Click one network adapter, you can view the flow statistics
such as send rate and receive rate at the top panel
© Copyright Qvis ®. All documentation rights reserved.
111
Advertisement
Table of Contents
